CONTENTS ENGLISH INDEX Device layout Getting started Connecting an AUX device Cleaning the speaker Battery care guide Performing a factory reset Attaching the carry strap Stack mode Troubleshooting...
Page 3
MIDDLETON – FULL ONLINE MANUAL DEVICE LAYOUT ENGLISH BACK TO INDEX...
Page 4
MIDDLETON – FULL ONLINE MANUAL DEVICE LAYOUT ENGLISH BATTERY STATUS BUTTON Push the Battery status button to see the battery charge. BLUETOOTH BUTTON Push and hold the Bluetooth button until the LED ® turns to a slow red pulse to start pairing mode.
MIDDLETON – FULL ONLINE MANUAL DEVICE LAYOUT ENGLISH ENGLISH AUX - 3.5 MM AUDIO INPUT Plug in an audio device with an analogue output and a 3.5 mm stereo jack. USB C - POWER INPUT/OUTPUT Charge the speaker by plugging it into a USB power source or plug in a USB-C device and use the speaker as a powerbank.
II. Push the Bluetooth button until the LED turns to a slow red pulse. ® III. Select MIDDLETON from your audio device’s Bluetooth list. CONNECTING AN AUX DEVICE Connect a lead with a 3.5 mm stereo jack to the AUX input on the back of the speaker.
Ensure that the speaker is on. II. Push and hold the Bluetooth button for 7 seconds. All indicators turn off and the speaker restarts. III. Remove Middleton from your audio device’s Bluetooth list before pairing again. MARSHALL BLUETOOTH APP Download the Marshall Bluetooth app to get the most out of your speaker and keep it up to date with the latest software.
Page 8
MIDDLETON – FULL ONLINE MANUAL ATTACHING THE CARRY STRAP ENGLISH Remove the screw from the carry strap. II. Thread the end of the strap through the top of the hinge on the speaker. III. Join the end of the strap with the screw and tighten it.
Page 9
STACK MODE ENGLISH Connect two or more Middleton speakers in a Stack session for a bigger sound. Play anything on the main speaker and all speakers in the session will play in sync. You can adjust the volume on any individual speaker for the perfect balance.
MIDDLETON – FULL ONLINE MANUAL TROUBLESHOOTING ENGLISH PROBLEM CAUSE ACTION The speaker does The battery has Plug the speaker not turn on no charge. into a USB power source to charge it. Push and hold the control knob for 2 seconds until the speaker turns on.
Page 11
MIDDLETON – FULL ONLINE MANUAL TROUBLESHOOTING ENGLISH PROBLEM CAUSE ACTION Bluetooth connection The two Bluetooth Move the devices drops out devices are too closer to each other far apart, or the so that they are connection is affected unobstructed by due to obstacles.
Page 12
MIDDLETON – FULL ONLINE MANUAL TROUBLESHOOTING ENGLISH BACK TO INDEX...
Need help?
Do you have a question about the MIDDLETON and is the answer not in the manual?
Questions and answers