Marshall Emberton - Portable Loudspeaker Manual

DEVICE LAYOUT

1. CONTROL KNOB
   1. POWER ON/OFF
      Push and hold for 2 seconds
   2. PLAY/PAUSE
      Push once
   3. III . SKIP FORWARD/BACK
      Push to the right or the left
   4. FAST FORWARD/REWIND
      Push to the right or left and hold
   5. TURN UP/DOWN THE VOLUME
      Push upwards or downwards
2. BLUETOOTH^® PAIRING BUTTON AND INDICATOR
   Push the Bluetooth^® button until the indicator above starts blinking to initiate Bluetooth pairing mode.
3. BATTERY INDICATOR
   The 10 segment battery indicator shows the battery charge.
4. USB PORT FOR CHARGING
   Connect the speaker to a power source via the included USB cable to charge the battery.
   The battery is fully charged when the battery indicator stops blinking.

GETTING STARTED

1. Push the control knob for 2 seconds. The speaker turns on and is in pairing mode.
2. Select EMBERTON from your audio device's Bluetooth list.