Table of Contents
Advertisement
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
•
According to a survey done by professional service associates, 56% of microwave
ovens used for more then 2 years can possibly leak levels of radiation 10% higher
than the safety standard of 5mW/cm
•
It will be vulnerable and uncomfortable for people if the microwave radiation
exposure level exceeds 5mW/cm
•
Microwave radiation is odorless and invisible. Its leakage can be caused by
slamming the oven door, leaving food particles in the hinges or seals and moving
the oven around etc.
•
To keep people from this danger and find out the emergency immediately, we
suggest to use our new model of LCD digital readout microwave leakage meter
for the household security.
•
The meter is a high quality consumer product with the latest technology that
utilizes an advanced sensor for detecting the microwaves leaking from the oven.
•
The highly sensitive sensor can detect the microwave accurately, even at low
volumes preventing potential injury from the radiation of the microwave.
•
The usage of this meter can be a very important addition to home safety.
FEATURES
•
LCD Digital readout.
•
Leakage volume of dangerous levels will sound an audible alarm and a red
warning lamp will flash.
•
Low leakage volume will display for information.
•
Erganomic design suitable for operation using left or right hand.
•
Battery life of more than 1 year.
•
High sensitivity to the microwave radiation.
OPERATION
•
Install a standard 9V battery noting correct polarity.
•
Press and hold the light/zero button to reset the device and adjust to zero.
•
Point the device towards an operating microwave oven, keeping two inches away
from the door seals or the front glass of the oven.
•
Then you may begin to take your readings, the values will display on LCD.
•
To activate the meter, press the power on button.
•
If you press the MAX key, the maximum reading will be stored in memory and
displayed on the LCD.
•
To power off the meter, press the power button again.
SPECIFICATIONS
•
Calibrated at 2450MHz
•
Range: 0- 9.99 mW/.cm
•
Warning value: 5.0 mW/cm
•
Power source: 9V PP3 battery
.
2
.
2
2
2
2
Made in China
www.multicomppro.com
Advertisement
Table of Contents
Need help?
Do you have a question about the MP780896 and is the answer not in the manual?
Questions and answers