Advertisement
Quick Links
Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions.......................................................................................................................6
Additional Mounting Options.............................. ..............................................................................10
Product Dimensions..........................................................................................................................11
B-Tech Contact Details.....................................................................................................................12
13mm (1/2") spanner
or socket
B-TECH AUDIO VIDEO MOUNTS
BT899
HEAVY DUTY PROJECTOR MOUNT
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Projector Mount
PLEASE KEEP THIS FOR FUTURE REFERENCE
CONTENTS
TOOLS REQUIRED
Drill
Crosshead
screwdriver
www.btechavmounts.com
FEATURES
● Pre-assembled for fast and simple three step installation
● Can be mounted flush to ceiling or onto 50mm (2") extension poles
or 1½" NPT pipe
● +/-13˚ tilt adjustment, +/-6˚ roll adjustment and 360˚ swivel
● Optional micro-adjustment feature for short throw projectors
● Unique 'Carousel' mounting plate for universal compatibility
● Mounts projector only 125mm (5") from ceiling
● Maximum distance between any 2 fixing points: 370mm (14.5")
● Suitable for projectors using M2.5, M3, M4, M5 and M6 fixings
● Theft-deterrent security features as standard (excludes M2.5mm
and M3 fixings)
● All mounting hardware & fixings included
10mm (7/16") masonry bit
or 6mm (1/4") wood bit
Pencil
Stud finder
(optional)
Advertisement
Related Manuals for B-Tech mountlogic Series
Summary of Contents for B-Tech mountlogic Series
-
Page 1: Table Of Contents
Parts List.............................4 Installation Instructions........................6 Additional Mounting Options......................10 Product Dimensions..........................11 B-Tech Contact Details........................12 TOOLS REQUIRED Pencil 13mm (1/2") spanner Stud finder Drill Crosshead 10mm (7/16") masonry bit or socket (optional) or 6mm (1/4") wood bit screwdriver B-TECH AUDIO VIDEO MOUNTS www.btechavmounts.com... -
Page 2: Installation Safety Notes
Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference. B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. - Page 3 Niniejszy produkt musi być zamontowany na odpowiedniej powierzchni, a podczas użytkowania nie wolno przekraczać podanego maksymalnego obciążenia. A B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta.
-
Page 4: Parts List
BT899 PARTS LIST Supplied pre-assembled Suitable for loads up to 25kg (55lbs) - Page 5 PART NAME CEILING PLATE JOINTING PLATE Ceiling plate SWIVEL PLATE CAROUSEL MOUNTING ARM LEVELING SCREW LEVELING SCREW COVER MOUNTING ARM CAP M6 SQUARE NUT M8 X 15mm PIN HEX SECURITY SCREW M8 NYLOC NUT (FOR PART 10) M6 X 12mm PIN HEX SECURITY SCREW M6 METAL WASHER (FOR PART 12) M8 PLASTIC WASHER (FOR PART 10 &...
-
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS Attach interface assembly to projector. Loosen part 12, adjust legs then re-tighten. MOUNTING HOLE... - Page 7 OPTIONAL MICRO-ADJUSTMENT For short throw projectors the micro-adjustment can be installed as shown. If the micro-adjustment is not required proceed to step 3. 22 21...
- Page 8 Mount ceiling plate to ceiling. Hook projector onto ceiling plate and secure using parts 12 and 13.
- Page 9 Adjusting the projector. i) To tilt/roll, loosen parts 12, adjust and re-tighten. To swivel, loosen part 10, adjust then re-tighten. ii) Micro-adjustment (if installed). To tilt/roll adjust parts 19.
-
Page 10: Additional Mounting Options
ADDITIONAL MOUNTING OPTIONS i. Mounting to 1½" NPT pipe. ii. Mounting to a 50mm (2") pole. SYSTEM 2 ADAPTOR 1½" NPT pipe (SUPPLIED) 50mm (2") POLE TYPICAL INSTALLATIONS BT7803 BT7822 BT7850 BT7850... -
Page 11: Product Dimensions
BT899 PRODUCT DIMENSIONS 260mm 10.2" 370mm 14.6" CEILING PLATE 104mm 4.1" 74mm 8.5mm 2.9" 0.3" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT. -
Page 12: B-Tech Contact Details
©2009 Bennett Technologies Limited. All rights reserved. B-Tech Audio Video Mounts is a division of Bennett Technologies Limited. B-Tech, Better By Design, Mountlogic, Atlas & System 2 are registered trademarks of Bennett Technologies Limited. All other brands and product names are trademarks of their respective owners.