Advertisement
Quick Links
REG. DESIGN NO: 3016251
Installation Safety Notes.....................................................................................................................2
Parts List.............................................................................................................................................4
Installation Instructions.......................................................................................................................6
Product Dimensions..........................................................................................................................14
B-Tech Contact Details.....................................................................................................................16
INSTALLATION TOOLS REQUIRED
13mm (1/2") &
10mm (2/5")
spanner or socket
B-TECH AUDIO VIDEO MOUNTS
BT881
UNIVERSAL PROJECTOR CEILING MOUNT
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Mount
PLEASE KEEP THIS FOR FUTURE REFERENCE
CONTENTS
Drill
Crosshead
screwdriver
www.btechavmounts.com
FEATURES
● Suitable for projectors up to 10kg (22lbs)
● Mounts projector only 115mm (4.5") from ceiling or 280mm (11")
with supplied extension rod
● +/-90º tilt adjustment, +/-90º roll adjustment and 360º swivel
● Easy to adjust and fix projector in position
● Steel safety wire for extra security
● Maximum distance between any two fixing points
on projector: 340mm (13.4")
● Suitable for projectors with M2.5, M3, M4, M5 and M6 fixings
● Simple installation with all mounting hardware included
8mm (5/16") masonry bit
or 5mm (3/16") wood bit
Pencil
Stud finder
(optional)
Advertisement
Related Manuals for B-Tech Mountlogic BT881/B
Summary of Contents for B-Tech Mountlogic BT881/B
-
Page 1: Table Of Contents
Parts List.............................4 Installation Instructions........................6 Product Dimensions..........................14 B-Tech Contact Details........................16 INSTALLATION TOOLS REQUIRED 13mm (1/2") & Pencil Stud finder Drill Crosshead 8mm (5/16") masonry bit 10mm (2/5") (optional) or 5mm (3/16") wood bit screwdriver spanner or socket B-TECH AUDIO VIDEO MOUNTS www.btechavmounts.com... -
Page 2: Installation Safety Notes
Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference. B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. - Page 3 Niniejszy produkt musi być zamontowany na odpowiedniej powierzchni, a podczas użytkowania nie wolno przekraczać podanego maksymalnego obciążenia. A B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta.
-
Page 4: Parts List
BT881 PARTS LIST Suitable for loads up to 10kg (22lbs) Ceiling Plate Assembly Interface Assembly... - Page 5 PART NAME CEILING PLATE SPACER BALL JOINT SHORT EXTENSION ROD LONG EXTENSION ROD ADAPTOR COVER PLATE (FOR PART 1) SECURITY CABLE M8 NUT M8 SPRING WASHER M6 X 6mm GRUB SCREW M6 X 10mm GRUB SCREW CAROUSEL LONG LEG SHORT LEG CAROUSEL COVER PLATE M8 X 20mm HEX SCREW THUMB WHEEL...
-
Page 6: Installation Instructions
INSTALLATION INSTRUCTIONS Loosen the grub screws, take the adaptor and cover plates off the ceiling plate. OPTIONAL - LONG CEILING DROP i. Disassemble, remove ii. Re-assemble, replacing short extension rod part 4 with part 5... - Page 7 i. Fix ceiling plate to the ceiling. ONLY USE PART A3 WHEN FIXING TO CONCRETE CEILINGS ii. Slide on the cover plates.
- Page 8 Attach interface assembly to projector. i. Attach legs to projector.
- Page 9 ii. Attach the adaptor to carousel and place on legs. iii. Attach the carousel to the legs. Using quick release hand wheels or using secure dome nuts and spacers.
- Page 10 Attach the projector to the ceiling plate assembly and secure with parts 12.
- Page 11 Attach the security cable. i. Un-screw one interface screw to attach security cable. ii. Loop the security cable over the leg.
- Page 12 iii. Re-attach the leg to the projector...
- Page 13 Adjusting the projector. To tilt/roll and swivel, loosen parts 11, adjust and re-tighten. 90° 360° Slide cover plates onto interface assembly.
-
Page 14: Product Dimensions
BT881 PRODUCT DIMENSIONS 92mm 50mm 3.6" 2" 12mm (0.5") THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT. - Page 15 PRODUCT DIMENSIONS CEILING PLATE 88mm 3.5" 14.5mm 0.6" 45mm 1.8" 59mm 2.3" 74mm 2.9" INTERFACE PLATE 340mm 13.4" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
-
Page 16: B-Tech Contact Details
©2009 Bennett Technologies Limited. All rights reserved. B-Tech Audio Video Mounts is a division of Bennett Technologies Limited. B-Tech, Better By Design & Mountlogic are registered trademarks of Bennett Technologies Limited. All other brands and product names are trademarks of their respective owners.
Need help?
Do you have a question about the Mountlogic BT881/B and is the answer not in the manual?
Questions and answers