BenQ 0.4 Wall Mount-WM04G3 User Manual

BenQ 0.4 Wall Mount-WM04G3 User Manual

Wall mount user manual

Advertisement

Quick Links

Warning

1. Please read and follow the instructions in this installation guide carefully
before installation and retain them for future reference.
2. The BenQ Corporation is not liable for any damage or injury resulting from
incorrect installation.
3. The wall mounting bracket is designed for easy installation and removal. The
BenQ Corporation accepts no liability for any damage or injuries due to
human action or from natural causes, such as an earthquake or typhoon.
4. This projector wall mounting bracket must only be installed by service
professionals.
5. At least two persons are required for the installation or removal of this bracket
to prevent personal injury, or material damage from heavy falling objects.
6. To ensure proper ventilation, install the projector with su cient clearance
between it and the wall and ceiling.
7. To ensure safe installation and avoid accidents, check the wall structure and
select a solid durable location.
8. The wall should be strong enough to support four times the total weight of
the projector and the wall mounting bracket, or more. It should also be of
su cient strength to bear the force of vibrations from earthquakes or other
events.
9. Check the surroundings of the mounting location before installation.
• Do not install in places where the temperature or humidity is high and
avoid moisture.
• Do not install near an air conditioner or vents, or in excessively dusty or oily
places.
• This product must only be installed on a vertical wall, not a slanting one.
• Do not install in places subject to vibration or shock.
• Keep the projector out of direct sunlight
10. Do not replace any parts or use damaged parts. Please contact your retailer if
you have any questions.
11. Fix the screws tightly but not excessively to avoid breakage or damage to the
threads.
12. The wall mounting bracket can support a maximum projector weight of
5J.J3A10.021: 15Kg or 33.07 lbs 5J.J4V10.011/5J.J4R10.011: 12Kg or 26.46 lbs.
13. Nothing extra must be added to the load on the wall mounting bracket.
Nothing should be attached or hung from it.
14. Holes for the screws will remain in the walls after the projector mounting
bracket has been removed and marks may also result from long term use.
1  Warning

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 0.4 Wall Mount-WM04G3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BenQ 0.4 Wall Mount-WM04G3

  • Page 1 1. Please read and follow the instructions in this installation guide carefully before installation and retain them for future reference. 2. The BenQ Corporation is not liable for any damage or injury resulting from incorrect installation. 3. The wall mounting bracket is designed for easy installation and removal. The BenQ Corporation accepts no liability for any damage or injuries due to human action or from natural causes, such as an earthquake or typhoon.
  • Page 2 Introduction Packaged Parts Required Tools / Torque Adjustment Angle Adjustment 1. Adjust the mounting bracket arm of the projector to 5°. 2. Adjust the rotation angle of the sides of the projected image. 3. Adjust the angular displacement of the top and the bottom of the projected image. 4.
  • Page 3: Packaged Parts

    Packaged parts Connection Connection plate A plate B Hinge module__1pcs Hinge module__1pcs Plastic plug__6pcs Tapping screw__6pcs Hex bolts(M6 xL8)__4pcs Hinge connector__1pcs Hex Head Screws(M6 xL10 )___2pcs Hex bolts (M6xL25)__1pcs Shim Screws__4pcs Height Cable Hex key(5mm) adjustment pipe management Wrenches __1pcs __4pcs cap__1pcs upper plastic cap__1pcs...
  • Page 4: Required Tools

    Required Tools 4. Spanner: 8mm / 10mm 5. Cross (Phillips) screwdriver 6. Pencil 1. Power drill 2. Drill bit 3. Hammer Angle Adjustment 1. Adjust the mounting bracket arm of the projector to ±5°. 4. Adjust the horizontal angular movement of the projected image. 2.
  • Page 5: Speci Cations

    Screw Tilt angle +/-10° Guide sheet for hole drilling Please visit www.benq.com for the latest guide sheet for hole drilling Mark A ==> MX880UST Connection plate A Mark B ==> MX850UST / MW851UST Mark A ==> MP772ST /MP776ST / MP782ST/ MX810ST/ MW811ST/ MX812ST / MX813ST Mark B ==>...
  • Page 6: Bottom Of The Projector

    Installation Steps 1. Installing the wall bracket A. Make sure the wall bracket (P) is in the correct position on the wall. Hold the bracket (P) rmly against the wall and mark the places for the holes with a pencil. Drill the holes at the marked points.
  • Page 7: Installation Steps

    Installation Steps 5. Adjusting the projection angle A. Using a hex wrench (K) to adjust the tightness of the internal hex screws (H), the projector may be adjusted to the required angle. After adjustment to the required angle, tighten internal hex screws (F) using the 5mm hex wrench (K), then replace the upper and lower plastic cover (N)(O).

Table of Contents