Siemens SIMATIC S7-1500/ET 200MP Manual page 41

Programming
5.1 Programming with STEP 7 (TIA Portal)
Status parameter
Error codes or status information are output as word at the Status output.
Code Meaning
(W#16#...)
0000 No error.
7000 No job in progress.
7001 Initialization in progress.
7002 The data is being read.
8001 An error has occurred in the WRREC or RDREC instruc-
tion.
8002 An error has occurred when reading the data block.
8003 An error has occurred when reading the upd file from
the SIMATIC Memory Card.
8004 An error has occurred when using the read-out data.
8005 The user logic in the TM FAST application if defective.
8006 An invalid state has occurred.
40
Remedy
—
—
—
—
Read the description of the WRREC/RDREC in the
information system of STEP 7 (TIA Portal) (error
code in static tag AdditionalErrorID).
• Check the UserlogicDB input parameter.
• Check the db file.
• Check the FilenameSMC input parameter.
• Check the upd file.
• Ensure that the upd file name does not con-
tain a special character or a space.
Check the upd or db file.
Check the upd or db file.
If the error permanently occurs, contact support.
Technology module TM FAST (6ES7554-1AA00-0AB0)
Equipment Manual, 04/2023, A5E52301130-AA