Siemens SIMATIC S7-1500/ET 200MP Manual page 12

Hide thumbs Also See for SIMATIC S7-1500/ET 200MP:
Table of Contents

Advertisement

Introduction
The technology module offers the possibility to control particularly fast processes with short
response times in the microsecond and nanosecond range. You can define the hardware
functionality of the module through application-specific programming of the FPGA in the
module. For this purpose, you use the external software Intel® Quartus® Prime. The free
version Intel® Quartus® Prime Lite Edition is sufficient in most cases.
Properties
The technology module has the following properties:
• Eight 24 V digital inputs (input characteristic curve according to IEC 61131, Type 3)
• Eight fast 24 V digital outputs
• Four 24 V digital inputs/outputs
• Eight RS422/RS485 channels (CHm), can also be used as TTL (single-ended) channels,
direction can be configured
• Configurable diagnostics
• Configurable input delay DIm: 0.001 ms ... 20 ms, or freely programmable using the
TM FAST application
• Configurable input delay of the RS422/RS485/TTL channels CHm: 0.5 µs ... 1000 µs, or
freely programmable using the TM FAST application
• 32 bytes cyclic input data and 32 bytes cyclic output data for free usage in the TM FAST
application.
• Up to 128 bytes acyclic input data and up to 128 bytes acyclic output data for free use in
the TM FAST application.
• The functionality of I/O data and inputs/outputs can be completely defined using the
TM FAST application
The module supports the following functions:
Table 2- 1
Firmware update
I&M identification data
Parameter reassignment in RUN
Isochronous mode
Update of the TM FAST application in the
flash memory
Module replacement without PG/PC by up-
dating the TM FAST application via an in-
struction at an S7-1500 CPU
Technology module TM FAST (6ES7554-1AA00-0AB0)
Equipment Manual, 04/2023, A5E52301130-AA
Version dependencies of the functions
Function
Firmware
version of the
STEP 7
module
(TIA Portal)
V1.0 or higher
V17 with
HSP0368
V1.0 or higher
V17 with
HSP0368
V1.0 or higher
V17 with
HSP0368
V1.0 or higher
V17 with
HSP0368
V1.0 or higher
V17 with
HSP0368
V1.0 or higher
V17 with
HSP0368
Product overview
2.1 Properties
Configurable as of
GSD
PROFINET IO
X
X
X
X
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm fast6es7554-1aa00-0ab0

Table of Contents