Husqvarna FE 501s 2022 Owner's Manual page 94

13 BRAKE SYSTEM
92
–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
–
Take off cover
F03508-10
–
Manually press the brake caliper toward the brake disc to
push back the brake pistons. Ensure that brake fluid does not
flow out of the brake fluid reservoir, extract some if neces-
sary.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake pis-
tons.
S05112-10
–
Remove cotter pin
–
5
Pull out pin
–
Remove the brake linings.
–
Clean the brake caliper and the brake caliper bracket.
–
Check that spring plate
pad sliding plate
correctly.
S04465-10
1
.
2 3
with membrane .
4
.
.
6
in the brake caliper and brake
7
in the brake caliper bracket are seated