Installing The Lower Triple Clamp - Husqvarna FE 501s 2022 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.10
58
S03552-10
H03683-10

Installing the lower triple clamp

B01632-10
Main work
–
1
Remove screw .
–
2
Remove screw .
–
3
Open cable holder in front of the left radiator and detach
the clutch line.
–
Take off the upper triple clamp with the handlebar and set
aside.
Info
Protect the components against damage by covering
them.
Do not kink the cables and lines.
–
4
Remove O-ring and protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Position the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
2
Mount protective ring
5
.
p. 150)
1
is correctly posi-
3
and O-ring .