Jøtul F 360v2 Advance Installation And Operation Manual page 16

ENGLISH
Fig. 27
7. Place the cover from the rear outlet in the top outlet and
screw into place.
Fig. 28
8. Attach the traverse (I) from the ash pan to the screw (G)
using the nut (H).
Fig. 29
9. Place the gasket (J) on the edge of the fl ue pipe (K).
10. Insert the fl ue pipe into the smoke outlet.
11. Put the top plate and lid back in place.
NB: It is important for the joints/fl ue pipes to be sealed
completely. Air leaks may prevent them from operating
properly.
16
4.8 Performance check
G
Once the product has been assembled, always check the
control handles. These should move easily and work in a
satisfactory manner.
The Jøtul F 360 Advance is equipped with the following
F
operating options:
Fig. 30
I
H
J
K
Air and ignition vent (A)
Pushed in:
Pulled out fully:
Door handle (B):
Open by pulling the handle out.
Stacking height (C) for logs (the holes must not be covered).
Lighting the fire
Maximum
Minimum
Closed
Open
C
B
A