Jøtul F 360v2 Advance Installation And Operation Manual page 12

ENGLISH
Jøtul F 363 Advance - product with pedestal
Fig. 13
B
• The outside air inlet (A) with opening (B) is located at the
rear of the burn chamber as standard.
Fig 14
NB: If using an external air supply through the fl oor, the outside
air inlet (A) must fi rst be rotated (fi g. 18 A).
12
Requirement for UK
"The Jotul F 360 Advance stoves have been recommended as
suitable for use in smoke control areas when burning wood logs
and when fi tted with a mechanical stop to prevent secondary
air control closure beyond the 382mm 2 and the tertiary air
control closure beyond the 402 mm 2 open positions." Note! In
order to achieve this see the instructions in fi g. 15.
Fig. 15
A
5. Use the screw (A) and the washer (B) from the bag of
Fig. 16
A
•
•
A
B
screws and screw it onto the burnchamber.
Use the screws from the bag of screws to attach the
pedestal to the burn chamber in the front. In the rear use
two of the screws from the brackets (fi g. 5 A).
Stand the product up.