Panning And Zooming The Map; Compass; Altimeter And Barometer; History - Garmin FENIX 6 Series Owner's Manual

Hide thumbs Also See for FENIX 6 Series:
Table of Contents

Advertisement

Panning and Zooming the Map

1 While navigating, press UP or DOWN to view the map.
2 Hold MENU.
3 Select Pan/Zoom.
4 Select an option:
• To toggle between panning up and down, panning left and right, or zooming, press
• To pan or zoom the map, press UP and DOWN.
• To quit, press BACK.

Compass

The device has a 3-axis compass with automatic calibration. The compass features and appearance change
depending on your activity, whether GPS is enabled, and whether you are navigating to a destination. You can
change the compass settings manually
you can press
from the compass widget.

Altimeter and Barometer

The device contains an internal altimeter and barometer. The device collects elevation and pressure data
continuously, even in low-power mode. The altimeter displays your approximate elevation based on pressure
changes. The barometer displays environmental pressure data based on the fixed elevation where the altimeter
was most recently calibrated
widgets to open the altimeter or barometer settings quickly.
History includes time, distance, calories, average pace or speed, lap data, and optional sensor information.
NOTE: When the device memory is full, your oldest data is overwritten.

Using History

History contains previous activities you have saved on your device.
The device has a history widget for quick access to your activity data
1 From the watch face, hold MENU.
2 Select History > Activities.
3 Select an activity.
4 Press
.
5 Select an option:
• To view additional information about the activity, select All Stats.
• To view the impact of the activity on your aerobic and anaerobic fitness, select Training Effect
Training Effect,
page 38).
• To view your time in each heart rate zone, select Heart Rate.
• To select a lap and view additional information about each lap, select Laps.
• To select a ski or snowboard run and view additional information about each run, select Runs.
• To select an exercise set and view additional information about each set, select Sets.
• To view the activity on a map, select Map.
• To view an elevation plot for the activity, select Elevation Plot.
• To delete the selected activity, select Delete.
70
(Compass Settings,
(Altimeter Settings,
page 82). You can press

History

page 82). To open the compass settings quickly,
from the altimeter or barometer
(Widgets,
page 79).
.
(About
History

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents