Projecting A Waypoint; Navigating To A Destination; Courses; Creating And Following A Course On Your Device - Garmin FENIX 6 Series Owner's Manual

Projecting a Waypoint

You can create a new location by projecting the distance and bearing from your current location to a new
location.
NOTE: You may need to add the Project Wpt. app to the activities and apps list.
1 From the watch face, press
2 Select Project Wpt..
3 Press UP or DOWN to set the heading.
4 Press .
5 Press DOWN to select a unit of measure.
6 Press UP to enter the distance.
7 Press to save.
The projected waypoint is saved with a default name.

Navigating to a Destination

You can use your device to navigate to a destination or follow a course.
1 From the watch face, press
2 Select an activity.
3 Hold MENU.
4 Select Navigation.
5 Select a category.
6 Respond to the on-screen prompts to choose a destination.
7 Select Go To.
Navigation information appears.
8 Press to begin navigation.

Courses

You can send a course from your Garmin Connect account to your device. After it is saved to your device, you
can navigate the course on your device.
You can follow a saved course simply because it is a good route. For example, you can save and follow a bike
friendly commute to work.
You can also follow a saved course, trying to match or exceed previously set performance goals. For example,
if the original course was completed in 30 minutes, you can race against a Virtual Partner trying to complete the
course in under 30 minutes.

Creating and Following a Course on Your Device

1 From the watch face, press
2 Select an activity.
3 Hold MENU.
4 Select Navigation > Courses > Create New.
5 Enter a name for the course, and select
6 Select Add Location.
7 Select an option.
8 If necessary, repeat steps 6 and 7.
9 Select Done > Do Course.
Navigation information appears.
10 Press to begin navigation.
66
.
.
.
.
Navigation