3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE 3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
File management with EnerVista 650 Setup software:
3.1.5.1 OFF LINE MODE
3
3-6
Run EnerVista 650 Setup
Open a *.650 file
("File>Open" menu)
Modify protection Settings
and relay configuration
Is it necessary to
additional logic?
NO
NO
Is the relay
completely
configured?
Save *.650 settings & configuration file
Store in the computer the Logic configuration files (*.pep, *.aut, *.lib) as
well as the *.650 for further logic changes.
Figure 3–3: OFF-LINE MODE FILE MANAGEMENT
G650 Generator Protection & Control System
YES
program
Launch the Logic Configuration tool in EnerVista
650 Setup ("Setpoint>Logic Configuration")
Create new or modify the existing logic:
Compile and save logic file (*.pep) and drawing
design (*.aut) in Logic Configuration tool
Exit PLC Graphic Editor and save the *.650 file
from the main application menu
YES
3.1.5 FILE MANAGEMENT
("File>Open Project")
GEK-113328A