Table of Contents
Advertisement
B.1 FACTORY DEFAULT SETTINGS
NOTE 2: DESCRIPTION OF X, Y AND Z IN INPUT/OUTPUT BOARDS
X
B
For the I/O board selection in the relay
model:
CCY
0Z
LIST OF TIME OVERCURRENT CURVES AVAILABLE IN
G650
IEEE extremely/very/moderately inverse
IEC Curve A/B/C/Long-Time Inverse/ Short-Time Inverse
IAC extremely/very/normally/moderately inverse
ANSI extremely/very/normally/moderately inverse
I2t
Definite time
Rectifier curve
User Curve - FlexCurve™ A/B/C/D
B-20
F, G, H or J, the I/O board name, depending on the Relay model.
F and G are internal Relay boards, and H and J are additional boards available in CIO modules
(remote Bus CAN I/O module)
I/O BOARD TYPE
ENERVISTA 650
ASSOCIATED DIGIT
SETUP BOARD
SETTINGS
0
NONE
1
16 INP+ 8 OUT
8 INP +8 OUT
2
+SUPV
4
32 INP
5
16 INP + 8 ANA
Is the name used for inputs in I/O boards
Mixed, 16 digital inputs: CC1....CC16
Supervision: 8 digital inputs: CC1,..., CC8
32 INP: 32 digital inputs; CC1,...,CC32
Is the name used for the different outputs in I/O boards, 8 outputs available for any of the two
types of board (01,...., 08)
G650 Generator Protection & Control System
BOARD TYPE
None
Mixed
Supervision
32 digital inputs
16 digital inputs + 8 analog inputs
APPENDIX B
GEK-113328A
Advertisement
Table of Contents
