Hussmann microSC MDN4775B1A Manual page 39

P/N 9FQ6P11007900_B
⑩ Apply caulking on drain hose connection to prevent water leaks.
⑫
Mount the upper evaporation tray with the drain
hose onto the unit base. Assemble parts removed
by the steps taken in a reverse order.
⑬
Then remove back guard from the rear side of merchandiser.
Pass the drain hose through the hole.
⑭ Make sure the back guard is mounted properly.
Important
● Handle the drain hose in a position lower than the evaporation trays.
If work in a position higher than the top of socket, water leak may occur.
● After this modi cation, the drain hose may be hooked when pull out the unit
from the merchandiser. Please pay attention
Parts List
No Part Name
１
Drain hose
２
Hose band
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Part Code
４ＦＬ－２－６３６０－１９８－００
８２１－０－８２０６－０２７－００
Apply caulk
Drain hose
Quantity
１p
１p
Open Vertical Merchandisers
4-5
Caulking
Back guard