Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PBSS 10-800
Summary of Contents for Trotec PBSS 10-800
- Page 1 PBSS 10-800 / PBSS 10-900 ORIGINAL INSTRUCTIONS BELT SANDER...
-
Page 2: Table Of Contents
PBSS 10-900 injury or death. Caution This signal word indicates a hazard with a low risk https://hub.trotec.com/?id=45859 level which, if not avoided, can result in minor or moderate injury. belt sander PBSS 10-800 / PBSS 10-900... -
Page 3: Safety
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. belt sander PBSS 10-800 / PBSS 10-900... - Page 4 Accessories running faster than their rated speed can hazards. break and fly apart. belt sander PBSS 10-800 / PBSS 10-900...
- Page 5 The device must only be used for dry sanding. • Hold the power tool by the insulated gripping surfaces, as the grinding surface could hit the connecting cable. We recommend using the power tool with original Trotec Damaging a live wire might energize metal parts of the accessories.
- Page 6 Wear eye protection and a dust mask! Warning Do not process materials containing asbestos. Asbestos is considered carcinogenic. Warning Risk of injuries caused by flying parts. Use a dust or chip bag or a dust extraction system. belt sander PBSS 10-800 / PBSS 10-900...
-
Page 7: Information About The Device
Info The illustrations in these instructions feature the device PBSS 10-800 by way of example. The represented operating steps and explanations also apply to device PBSS 10-900 unless otherwise mentioned. belt sander PBSS 10-800 / PBSS 10-900... - Page 8 • 1 x Adapter for dust extraction • 2 x Retaining bracket • 1 x Abrasive belt for wood, grain size: 80, dimensions: 76 x 457 mm (PBSS 10-800) • 1 x Abrasive belt for wood, grain size: 80, dimensions: 76 x 533 mm (PBSS 10-900) • 1 x Manual Accessories belt sander PBSS 10-800 / PBSS 10-900...
- Page 9 Sound values according to EN 62841-2-4 Sound pressure level 90.2 dB(A) 89 dB(A) Sound power L 101.2 dB(A) 100 dB(A) Uncertainty K 3 dB 3 dB Wear hearing protection. Excessive noise can lead to hearing loss. belt sander PBSS 10-800 / PBSS 10-900...
-
Page 10: Transport And Storage
The abrasive belt can be exchanged for processing different materials. Moreover available are different grain sizes for coarse to fine sanding. It might be necessary to adjust the speed of rotation / belt speed according to the new abrasive belt. belt sander PBSS 10-800 / PBSS 10-900... - Page 11 4. Close the locking lever (11). 5. Switch the device on. Upon switch-on the belt run is automatically centred. If not, the belt run may have to be adjusted manually using the adjusting screw (10). belt sander PBSS 10-800 / PBSS 10-900...
- Page 12 3. Empty the dust bag (6) in due time to maintain an optimum absorption of dust. ð If the belt run is still not centred after the adjustment, the abrasive belt (8) needs to be replaced. belt sander PBSS 10-800 / PBSS 10-900...
- Page 13 If anything is unclear or if you have questions, please contact the manufacturer of your vacuum cleaner. Connecting the power cable 1. Insert the mains plug into a properly secured mains socket. belt sander PBSS 10-800 / PBSS 10-900...
-
Page 14: Operation
(3 – 4) for dry sanding untreated wooden surfaces. • Use a dust extraction system when grinding off residual paint. Paint residues might smelt and then smudge both workpiece and abrasive belt. belt sander PBSS 10-800 / PBSS 10-900... - Page 15 ð The on/off switch is locked in place. ð The device keeps running and continuous operation is activated. 4. Position the device on the workpiece. 5. Lift the device off the workpiece before you switch it off. belt sander PBSS 10-800 / PBSS 10-900...
-
Page 16: Available Accessories
2. Insert two retaining brackets (9) into the provided PBSS 10-900 fixtures (12). Belt sanding paper set, 10-piece 6.235.001.102 3. Screw the retaining brackets (9) down by turning clockwise. 4. Check the retaining brackets (9) for tight fit. belt sander PBSS 10-800 / PBSS 10-900... -
Page 17: Errors And Faults
• Check the belt speed setting. It must be suitable for both the abrasive belt and the material. • Select a higher speed level by turning the setting wheel for the belt speed selection to the desired level. belt sander PBSS 10-800 / PBSS 10-900... -
Page 18: Maintenance
Only for United Kingdom According to Waste Electrical and Electronic Equipment Regulations 2013 (2013/3113) power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly manner. belt sander PBSS 10-800 / PBSS 10-900... -
Page 19: Declaration Of Conformity
Declaration of conformity in accordance with the EC Machinery Directive 2006/42/EC, Annex II, Part 1, Section A Directive 2006/42/EC, Annex II, Part 1, Section A We – Trotec GmbH – declare in sole responsibility that the We – Trotec GmbH – declare in sole responsibility that the product designated below was developed, constructed and... - Page 20 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...