Wear safety glasses There is an increased risk of electric shock if your body is Information marked with this symbol indicates that you earthed or grounded. should wear eye protection. Polishing machine PPOS 10-120...
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second. Polishing machine PPOS 10-120...
Page 4
We recommend using the power tool with original Trotec • Never lay the power tool down until the accessory has accessories.
Page 5
Dangers can occur at the device when it is used by untrained people in an unprofessional or improper way! Observe the personnel qualifications! Warning The device is not a toy and does not belong in the hands of children. Polishing machine PPOS 10-120...
II (double insulation) / Weight 2 kg Vibration information according to EN 62841 Vibration emission value a 7.542 m/s Uncertainty K 1.5 m/s Sound values according to EN 62841 Sound pressure level L 70.4 dB(A) Sound power L 81.8 dB(A) Uncertainty K 3 dB Polishing machine PPOS 10-120...
• dry and protected from frost and heat • Ambient temperature below 45 °C • Protected from dust and direct sunlight • Store the device with the polishing disc facing upwards in order for the polishing disc to maintain its shape. Polishing machine PPOS 10-120...
1. Insert the mains plug into a properly secured mains lightly dried on the entire surface. socket. • Treat the surfaces in the same order as you applied the polishing agent before. Treat even and large areas first. Then, treat smaller areas. Polishing machine PPOS 10-120...
Accessories Article number Polishing bonnet set 6.235.000.201 4. Switch the device off by setting the on/off switch (1) to position O. Only then remove the device from the surface to be treated. Polishing machine PPOS 10-120...
• Check the power connection. opened must only be carried out by authorised specialist companies or by Trotec. • Check the power cable and mains plug for damage. If you notice damages, do not try to take the device back into Notes on maintenance operation.
Directive 2006/42/EC, Annex II, Part 1, Section A disposal regulations. We – Trotec GmbH – declare in sole responsibility that the product designated below was developed, constructed and The icon with the crossed-out waste bin on waste...