Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PESS 10-20V
Summary of Contents for Trotec PESS 10-20V
- Page 1 PESS 10-20V ORIGINAL INSTRUCTIONS CORDLESS RANDOM ORBITAL SANDER...
-
Page 2: Table Of Contents
Note This signal word indicates important information (e.g. material damage), but does not indicate hazards. Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Cordless random orbital sander PESS 10-20V... -
Page 3: Safety
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. Cordless random orbital sander PESS 10-20V... - Page 4 • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Cordless random orbital sander PESS 10-20V...
- Page 5 Accidental contact with the spinning accessory could The device must only be used for dry sanding. snag your clothing, pulling the accessory into your body. We recommend using the power tool with original Trotec accessories. Cordless random orbital sander PESS 10-20V...
- Page 6 Fine dust produced during grinding is highly flammable. Risk of fire and explosion! Use the dust collector or a dust extraction system for collecting the produced dusts. Empty the dust collector before taking work breaks. Cordless random orbital sander PESS 10-20V...
- Page 7 The device is not a toy and does not belong in the hands of children. Warning Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy. Cordless random orbital sander PESS 10-20V...
-
Page 8: Information About The Device
Adapter for external dust extraction Sanding sheet Dust collector with filter Battery level indication Release button Green battery LED (quick charger ready for operation) Dust extraction connection Battery holder On/off switch Additional handle Setting wheel oscillation rate selection Cordless random orbital sander PESS 10-20V... - Page 9 Cable length 1.5 m Protection class II (double insulation) / Vibration information according to EN 62841-2-4 Vibration emission value main 10.26 m/s² handle a Vibration emission value front 8.69 m/s² handle a Uncertainty K 1.5 m/s² Cordless random orbital sander PESS 10-20V...
-
Page 10: Transport And Storage
Warning Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy. • Dispose of the packaging material according to the national regulations. Cordless random orbital sander PESS 10-20V... - Page 11 2. If required, charge the battery (6) as described in the 5. Take the battery (6) out of the quick charger (4) by section Charging the battery. pressing and holding the release button (11) and pulling the battery (6) off the quick charger (4). Cordless random orbital sander PESS 10-20V...
- Page 12 4. Firmly press the sanding sheet (8) down. 3. Lock the new position by tightening the wing screw (3) in 5. To exchange or remove the sanding sheet (8), simply pull it clockwise direction. off the sanding plate (2). Cordless random orbital sander PESS 10-20V...
- Page 13 3. Connect a suitable vacuum cleaner (e.g. industrial vacuum 2. Then turn the dust collector (9) clockwise to lock it in cleaner) to the adapter (7). If anything is unclear or if you place. have questions, please contact the manufacturer of your vacuum cleaner. Cordless random orbital sander PESS 10-20V...
-
Page 14: Operation
Paint residues might smelt and then smudge both workpiece and sanding sheet. • Switch the device on before applying it to the workpiece. Once the grinding process is concluded, lift the device off the workpiece before you switch it off. Cordless random orbital sander PESS 10-20V... -
Page 15: Available Accessories
Using insertion tools or accessories other than those specified in the instructions may cause a risk of injury. Designation Article number Multiflex 20V 2.0 Ah spare battery 6.200.000.303 Multiflex 20V 4.0 Ah spare battery 6.200.000.320 Cordless random orbital sander PESS 10-20V... -
Page 16: Errors And Faults
• Select a lower oscillation rate by turning the setting wheel • Check the quick charger for damages. Should the quick for the oscillation rate selection to the desired level. charger be damaged, stop using it. Contact the Trotec The device becomes hot: customer service. -
Page 17: Maintenance
• Remove dust and chips from the chip ejector. If the chip connection (13) again. The two lugs (19) at the dust ejector is blocked, clean it with suitable means (e.g. extraction connection (13) fit into the two grooves of the compressed air). dust collector (9). Cordless random orbital sander PESS 10-20V... -
Page 18: Disposal
Please dispose of batteries and filter insert into the dust collector! accumulators according to the relevant legal requirements. 4. Fit the filter retainer with the filter insert back into the dust collector cover. Cordless random orbital sander PESS 10-20V... -
Page 19: Declaration Of Conformity
Declaration of conformity Declaration of conformity in accordance with the EC Machinery Directive 2006/42/EC, Annex II, Part 1, Section A We – Trotec GmbH – declare in sole responsibility that the product designated below was developed, constructed and produced in compliance with the requirements of the EC Machinery Directive in the version 2006/42/EC. - Page 20 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...