Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trotec PPOS 10-20V
Summary of Contents for Trotec PPOS 10-20V
- Page 1 PPOS 10-20V ORIGINAL INSTRUCTIONS CORDLESS POLISHER...
-
Page 2: Table Of Contents
Power tools create sparks which may ignite the dust or fumes. • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. cordless polisher PPOS 10-20V... -
Page 3: Safety
A moment of inattention while operating power tools may result in serious personal injury. cordless polisher PPOS 10-20V... - Page 4 This will ensure that the safety of the power tool is maintained. • Never service damaged battery pack. Service of battery packs should only be performed by the manufacturer or authorized service providers. cordless polisher PPOS 10-20V...
- Page 5 The spinning accessory may plated areas. grab the surface and pull the power tool out of your We recommend using the power tool with original Trotec control. accessories. • Do not run the power tool while carrying it at your side.
- Page 6 Warning Toxic dusts! The harmful / toxic dusts produced during operation pose of risk to the health of the operator and persons in the vicinity. Wear eye protection and a dust mask! cordless polisher PPOS 10-20V...
-
Page 7: Information About The Device
Green battery LED (quick charger ready for operation) Battery holder Scope of delivery • 1 x Cordless polisher PPOS 10-20V • 1 x Rechargeable battery • 1 x Quick charger • 1 x Cloth polishing bonnet • 1 x Synthetic fibre polishing bonnet • 1 x Manual cordless polisher PPOS 10-20V... - Page 8 Charging time Protection class II / Vibration information according to EN 62841 Vibration emission value a 9.15 m/s Uncertainty K 1.5 m/s Sound values according to EN 62841 Sound pressure level L 66.4 dB(A) Sound power L 77.4 dB(A) Uncertainty K 3 dB cordless polisher PPOS 10-20V...
-
Page 9: Transport And Storage
• Check the contents for completeness and look for damages. Warning Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy. • Dispose of the packaging material according to the national regulations. cordless polisher PPOS 10-20V... - Page 10 2. If required, charge the battery (6) as described in the 5. Take the battery (6) out of the quick charger (4) by section Charging the battery. pressing and holding the release button (10) and pulling the battery (6) off the quick charger (4). cordless polisher PPOS 10-20V...
-
Page 11: Operation
• Prior to polishing, make sure that the polishing agent has lightly dried on the entire surface. • Treat the surfaces in the same order as you applied the polishing agent before. Treat even and large areas first. Then, treat smaller areas. cordless polisher PPOS 10-20V... -
Page 12: Available Accessories
• Check the power cable and mains plug for damage. • Check the on-site fusing. • Check the quick charger for damage. If the quick charger is damaged, stop using it. Contact the Trotec customer service. • Check the battery terminals for dirt. Remove any dirt. -
Page 13: Maintenance
The motor is running but polishing the surface does not opened must only be carried out by authorised work specialist companies or by Trotec. • Check whether you chose the appropriate polishing bonnet Notes on maintenance for your current working step. Use the cloth polishing bonnet for applying the polishing agent. -
Page 14: Disposal
The Section A addresses can be obtained from your municipality or local Herewith, we – Trotec GmbH– declare that the machinery administration. For further return options provided by us please designated below was developed, constructed and produced in refer to our website https://de.trotec.com/shop/. - Page 15 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the PPOS 10-20V and is the answer not in the manual?
Questions and answers