Table of Contents
Advertisement
30
en | Install Wizard
6.1.1
Adjustment procedure
A monitor must be connected to the video service connector to
use the wizard. (After power-up, wait 20 seconds before
attempting to open the install wizard.)
Figure 6.2 Lens adjustment
1.
2.
3.
4.
AM18-Q0600 | v1.0 | 2011.07
Focal length
Briefly press the Menu button to start the wizard.
–
You see the following on the monitor screen:
Lens type
MBF feedback
Auto MBF
–
The lens type is identified and shown on the screen.
–
The iris is opened to its maximum value.
Manually adjust the focal length on the lens to obtain the
required field of view.
Manually adjust the focus on the lens to obtain the
sharpest image possible.
To rotate the image 180°, press and hold the Menu button
until the image flips.
Installation Manual
DinionHD 1080p IP Camera
Focus
180°
MBF info
Bosch Security Systems
Advertisement
Table of Contents
