Advertisement
EMN2560
5-Megapixel IR & WDR,
Outdoor Mini Fixed Dome Network Camera
Quick Installation Guide
Copyright © EverFocus Electronics Corp.
Release Date: April, 2021
All the images including product pictures or screen shots in this document are for example only.
The images may vary depending on the product and software version. Information contained in
this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338FAX: +886 2 2662 3632www.everfocus.com.tw
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EverFocus EMN2560
Summary of Contents for EverFocus EMN2560
- Page 1 The images may vary depending on the product and software version. Information contained in this document is subject to change without notice. EverFocus Taiwan: 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan TEL: +886 2 2662 2338FAX: +886 2 2662 3632www.everfocus.com.tw...
- Page 2 IR LEDs IR LEDs for infrared illumination in night vision applications. Lens Camera Lens. Insert a micro SD card. Please go to the product page on Micro SD Card Slot EverFocus website to see the latest Storage Compatibility List. http://www.everfocus.com.tw Dimensions...
- Page 3 Note: Equipment configurations and supplied accessories vary by country. Please consult your local EverFocus office or agents for more information. Please also keep the shipping carton for possible future use. 2. Contact the shipper if any items appear to have been damaged in the shipping process.
- Page 4 3. Installation 1. Before screwing the camera to the wall, stick the supplied Mounting Sticker on the wall / ceiling to mark the positions for installation. Drill four holes on the wall / ceiling according to the supplied sticker and push the supplied four Screw Anchors into the four holes on the wall / ceiling.
- Page 5 4. Screw the camera module to the Mounting Plate: a. Before mounting the camera module onto the Mounting Plate, thread the cables through the wall or along the wall. Through the wall / ceiling: run the cables through the hole on the wall / ceiling. Along the wall: break the side cut plate on the Mounting Plate and then run the cable from the side cut.
- Page 6 b. Connect the RJ-45 cable to the LAN/PoE Cable of the camera. RJ-45 Cable LAN/PoE Cable c. Tightly screw the Cable Gland and Screw Cap to the Rugged RJ-45 Connector Cable. Screw Cap Cable Gland d. Crimp the RJ-45 connector onto the RJ-45 network cable. Note that the wires should be placed into the RJ-45 connector based on the following order (from left to right).
- Page 7 You can look up the IP address of the IP camera using the IP Utility (IPU) program. You can download the IP Utility from EverFocus website (key word search: "IP Utility"). The default network is DHCP. However, if there is no dynamic IP address assigned to the device, its IP will switch to 192.168.0.10.
Need help?
Do you have a question about the EMN2560 and is the answer not in the manual?
Questions and answers