6.
Optionally insert a micro SD / SDHC card to the card slot. See No.2 in 2. Overview.
7.
Access the camera live view. See 5.1 Assigning an IP Address. Or using the supplied Test‐Out cable
to connect a monitor to the Test‐Out connector (see No.4 in 2. Overview) of the camera for
adjusting camera angles.
Note: Do Not adjust camera focus yourself as it has already been adjusted (with the dome
cover on) in the factory. It is normal to see the blurry image on the live view when the camera is
connected to a monitor without the dome cover on. The live view image will be focused once
the dome cover has been put back to the camera.
Pan Adjustment: Loosen the screw and pan the camera by ±25°.
Tilt Adjustment: Loosen the screw and tilt the camera by 90°.
Rotational Adjustment: Loosen the screw and rotate the camera by ±90°.
8.
Secure the cover back to the camera.
7
EMN Series Mini Mobile IP Dome