Preset Point - D-Link DCS-6511 User Manual

Section 3: Configuration
If your viewing window area is less than your frame size, you can use preset points to save specific camera positions (refer to Video Stream on page
41 for more details). You can also set a preset sequence for the camera to patrol through automatically. After making any changes, click the Save
button to save your changes.
Video Profile:
This selects which video profile to use.
ePTZ Speed:
You can set how fast the camera will pan/tilt/zoom and auto pan.
Input Preset
To create a new preset, click and drag the red box in the live video to the
Name:
position you want, enter the name of the preset you want to create, then
click the Add button. If an existing preset has been selected from the Preset
List, you can change its name by typing in a new name, then clicking the
Rename button.
Preset List:
Click this drop-down box to see a list of all the presets that have been created.
You can select one, then click the GoTo button to change the displayed
camera view to the preset. Clicking the Remove button will delete the
currently selected preset.
Preset This section allows you to create a preset sequence, which automatically
Sequence: moves the camera's view between a set of preset views. To add a preset to
the sequence, select it from the drop-down box, then click the Add button.
You can move the selected preset earlier or later in the sequence by clicking
the arrow buttons, and you can remove a preset by selecting it and clicking
the trashcan button. You can also set how many seconds the camera will stay
at each position by setting the Dwell Time for each preset.
D-Link DCS-6511 User Manual

Preset Point

43