Ipv6; Pppoe - D-Link DCS-6511 User Manual

Section 3: Configuration
Use this section to configure your camera's IPv6 settings. After making any changes, click the Save button to save your changes.
Enable IPv6:
Enable the IPv6 setting to use the IPv6 protocol.
Manually
Enabling the option allows you to manually set up the address, specify an
Setup The IP
optional IP address, specify an optional router address, and an optional
Address: primary DNS address. You can click the Information button to see the IPv6
address lists for the host, gateway, and DNS server.
Use this section to configure your camera's PPPoE settings. After making any changes, click the Save button to save your changes.
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name /
Enter the username and password for your PPPoE account. Re-enter your
Password:
password in the Confirm Password field. You may obtain this information
from your ISP.
PPPoE Status:
This shows your current PPPoE connection status.
D-Link DCS-6511 User Manual

IPv6

PPPoE

30