D-Link DCS-6511 User Manual page 40

Section 3: Configuration
Lens Control
Setting this to Automatic will allow the camera to automatically adjust its
Focus Mode:
focus. Setting this to Manual will bring up the Focus slider, which you can
use to manually adjust the camera focus.
Zoom: Click anywhere on the bar to adjust the camera zoom.
Focus: If the Focus Mode is set to Manual, this bar will appear. Click anywhere on the
bar to adjust the camera focus, or click the Fine-tune focus automatically
button to automatically adjust the focus.
Lens zoom You may select a value between 0 and 10. 0 is the slowest and 10 is the fastest.
speed:
OSD Settings
OSD:
Select this option to enable the On-Screen Display feature for your camera.
This will allow some information to appear in the top-left corner of the
camera's video.
Label:
Enter a label for the camera, which will be shown on the OSD when it is
enabled.
Show Time:
Select this option to enable the time-stamp display on the video screen.
D-Link DCS-6511 User Manual 40