Preset Point - D-Link DCS-6517 User Manual

Section 3: Configuration
If your viewing window area is less than your frame size, you can use preset points to save specific camera positions (refer to Video Stream on page
47 for more details). You can also set a preset sequence for the camera to patrol through automatically. After making any changes, click the Save
button to save your changes.
This selects which video profile to use.
Video Profile:
You can set how fast the camera will pan/tilt/zoom and auto pan.
ePTZ Speed:
To create a new preset, click and drag the red box in the live video to the
Input Preset
position you want, enter the name of the preset you want to create, then
Name:
click the Add button. If an existing preset has been selected from the Preset
List, you can change its name by typing in a new name, then clicking the
Rename button.
Click this drop-down box to see a list of all the presets that have been created.
Preset List:
You can select one, then click the GoTo button to change the displayed
camera view to the preset. Clicking the Remove button will delete the
currently selected preset.
This section allows you to create a preset sequence, which automatically
Preset
moves the camera's view between a set of preset views. To add a preset to
Sequence:
the sequence, select it from the drop-down box, then click the Add button.
You can move the selected preset earlier or later in the sequence by clicking
the arrow buttons, and you can remove a preset by selecting it and clicking
the trashcan button. You can also set how many seconds the camera will stay
at each position by setting the Dwell Time for each preset.
D-Link DCS-6517 User Manual

Preset Point

49