Settings; Showing Demonstration; Setting The Clock; Setting The Timer - RCA RS2044 User Manual

RS2044 EN 1/20/05

Settings

Showing Demonstration

EN
Press DEMO to turn on/off demonstration mode.
The demonstration scrolls through all display
operations.

Setting the Clock

1. Press and hold CLOCK on the remote control
until the hour flashes on the display.
2. Press SKIP BACKWARD
FORWARD
press CLOCK to shift to minute digits.
3. Press SKIP BACKWARD
FORWARD
4. Press PROG/SET to save settings and STOP
to quit setting.
Note:
When system is ON, you can press CLOCK
to display the current time for about 2
seconds.
6
4:29 PM Page 12
or SKIP
to set the hour and then
or SKIP
to set the minute.

Setting the Timer

1. Press and hold TIMER on the remote control
until the ON and clock hour flashes on the
display ( ON - timer on time ).
2. For setting time, press SKIP BACKWARD
or SKIP FORWARD to set the hour and
then press TIMER to shift to minute digits.
3. Press SKIP BACKWARD
FORWARD to set the minute.
4. Press TIMER to change to OF (timer off time)
with clock time flashing. Repeat steps 2 & 3 for
timer off time setting.
5. Press TIMER to select source. Press SKIP
BACKWARD or SKIP FORWARD
to select between CD / TUNER .
6. Press TIMER to set volume. Adjust VOLUME
to select desired volume level.
7. Press PROG/SET on the remote control to save
settings.
Press STOP to quit setting.
The timer is automatically activated once timer
setting is saved.

Activating the Timer

Press and release TIMER to turn on/off the alarm.
The timer icon is displayed when timer is
activated.
or SKIP