Radio; Selecting Tuner Band; Tuning To A Station; Using Presets - RCA RS2044 User Manual

RS2044 EN 1/20/05

Radio

Selecting Tuner Band

EN
1. Press SOURCE repeatedly to enter Tuner mode.
2. Press BAND to select between FM or AM
Radio band.
Tips:
Your audio system has 32 preset stations.

Tuning to a Station

Press SKIP BACKWARD
FORWARD to select frequencies.

Using Presets

The tuner can be in either TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
• Press STOP to toggle TUNE and PRESET
mode.
• Press SKIP BACKWARD
FORWARD
main system or FOLDER/PRESET
access the previous or next preset station.
The display first shows the preset program
number and after a few seconds, the frequency
will be displayed.
(FMPR:01 is FM preset 1)
12
4:29 PM Page 18
or SKIP
or SKIP
on the
or to
Auto Preset Programming
(FM only)
Press and hold the BAND button for 2 seconds to
scan stations in FM band. The stations will then
be stored as preset channels. A maximum of 32
stations can be stored. Beware of your preset
channels being erased accidentally because the
scanning and storing process is automatic upon
pressing the button. You can stop the automatic
scan by pressing any button, but the erased
stations cannot be recovered.

Manually Setting Presets

1. Press the STOP button to enter TUNE
mode.
2. Press SKIP BACKWARD
FORWARD to access the desired
frequency.
3. Press the PROG/SET button once.
4. The most recently accessed program location
will be displayed.
5. If a different program location is preferred,
press SKIP BACKWARD
FORWARD on the main unit or
FOLDER/PRESET or
desired preset number (1-32).
6. Press PROG/SET to store the selected
frequency at that preset.

Suppressing Stereo Signal

Press FM ST to toggle between FM mono and
stereo mode. (Remote Only) "STEREO" is
displayed in stereo mode.
or SKIP
or SKIP
to move to the