Kodak ThermoFlex Wide II Site Preparation Manual page 40

Output device
Table of Contents

Advertisement

36
21. Is the air supply filtered and dried as per specification? (See Air Supply on
page 15.).
Yes
No
Comments:
22. Are the voice and data telephone lines installed?
Yes
No
Comments:
23. What type of network connection is used?
24. What are the three consecutive TCP/IP addresses that are to be used for the
MCE and RAS connection? (See Network on page 20.)
1.
2.
3.
Follow Up
Is follow-up required?
No
The location described in this document meets all criteria for a
timely and successful installation of the ThermoFlex Wide II device.
Yes
Some follow-up is required to ensure that the site requirements are
met prior to the installation of the device.
The outstanding items from the Site Requirements list are:
Appendix B: Site Inspection Checklist
Prefilter ordered
Modem number:

Advertisement

Table of Contents
loading

Table of Contents