Table of Contents
Advertisement
Site Requirements
Environmental Conditions
Floors
The UDRC configuration may include various filter options tailored to suit specific
qualified media types. The configuration for a particular customer site is typically
specified in a Kodak proposal, sales agreement, order form, product specification, or
equivalent document.
The cabinet must be located within the cable and hose limitations.
For more information on the debris removal cabinet, please refer to the UDRC Site
Preparation Guide (part number 725-00089A).
Install the device in a clean prepress area wherever possible to ensure the highest
quality output. If you must install the device in a pressroom environment, an
enclosed room is mandatory.
Operating environment for the device:
Temperature
17
o
–25
o
Humidity
30%–70% RH, non-condensing
Note: Some media types may restrict the operating environment of the system. Consult
the media manufacturer for their recommended temperature and humidity ranges for
media use and storage.
For the UDRC operating environment, see the UDRC Site Preparation Guide (part
number 725-00089A).
The floor must be level, with a maximum incline or waviness of ±12.5 mm (±0.5 in.)
across the footprint. The maximum floor loading specifications for the device are:
•
Maximum concentrated load: 400 kg (880 lb.)
•
Loading pressure: 635 kPA (92 psi) (per area of one support foot)
•
Floor load (average): 260kg/m
The device is suitable for mounting on a concrete floor or other non-combustible
floor material only, extending a minimum of 150 mm (5.9 in.)around the perimeter
of the machine.
The floor loading specifications for the pedestal's Hilti® bolts are 13790 kPA (2000
psi) in North America. For installation in Europe, contact the local Hilti dealer for
their Technical Guide for Concrete Strength to ensure adequate concrete strength.
C (63
o
–77
o
F)
2
2
(53 lb./ft.
)
11
Advertisement
Table of Contents
