22
Doors and Hallways
Figure 8: Lifting points
WARNING: Lift the machine only by inserting the forks in the engine casting. Do not
attempt to lift the device from underneath. Ensure that the cable track on the back of the
engine casting is not in the way of the forklift channels in the engine casting.
The customer must provide free access through doors and hallways from the
entrance to the ThermoFlex Wide II location so that the whole pallets can be
transported to the installation location. Kodak recommends that the customer
furnish a drawing of the route. See Shipping Crates on page 23 for maximum crate
dimensions.
Once the components are uncrated, they may be moved through smaller doorways.
See Table 1 on page 3 for dimensions of individual components.
Note: Walk the entire route from the loading dock to the installation area. Measure all
doorways, openings and aisles to ensure that there is adequate space to move all of the
components safely.
ThermoFlex Wide II Site Preparation Guide