ADJ UB 12H User Manual page 14

O P E R AT I N G I N S T R U C T I O N S
Dimmer Curve:
This setting is used to set the dimming curve used with DMX mode. See the Dimming Curves section
of this manual for detailed information.
1. Plug the fixture in and press the MODE button until the current DMX address is displayed.
2. Press the SET UP button until "dr-X" is displayed. "X" represents the displayed dimmer curve (0-4).
• 0 - Standard
• 1 - Stage
• 2 - TV
• 3 - Architectural
• 4 - Theatre
3. Press the UP or DOWN buttons to scroll through and select your desired dimming curve.
Default Running Mode:
This is a default running mode. When this mode is activated, all settings will return to their default
settings and an auto program will run.
1. Plug the fixture in and press the MODE button until "d.XX" is displayed. "XX" represents either "on"
or "oFF".
2. Press the SET UP button until "dEFA" is displayed.
3. Press the UP and DOWN buttons at the same time.
14