Advertisement
1 、 Product functions & Parameters
1.1 Product functions
Location inquiry, geo-fence, over-speed alarm, power-off alarm, historical route playback,
voice monitoring
1.2 Parameters
●UT07 2G Frequeny: 850/900/1800/1900 Mhz;
●UT07L 4G Frequeny: LTE FDD: B1/2/3/4/5/7/8/28/66 and 850/900/1800/1900 Mhz;
●Wide voltage input range: 8 - 24V;
●Location time: average warm start:≤3sec(open sky)
●Device dimensions:42mm × 28mm × 17mm;
●Location accuracy:≤10 meters;
●Working Temp:-20℃ - 75℃
●Backup battery: 200mAh
2 、 Product accessories and LED light status
2.1 Accessories:
Standard: device, user manual
2.2 Device LED light status
2.2.1 Yellow LED (GSM signal status)
Light status
Flash every 2 seconds
on
off
2.2.2 Blue LED (GPS signal status)
Light status
Flash every 2 seconds
on
off
3 、 Installation instructions
3.1 Preparation before installation:
1, Open the box and check whether the device and the accessories are complete, otherwise please
contact your dealer.
2, SIM card selection, the device works with Micro SIM card, and support full Netcom band.
3, SIM card installation, SIM card corner inside, chip face to the side with shrapnel, which can help
to hold the card.
Note: (1) Before installing or removing the SIM card, please switch off the device;
(2) Should activate the GPRS function of the SIM card;
Average cold start:≤35sec(open sky)
Meaning
GSM initialization
GPRS normal communication/online
GSM sleep/power off
Meaning
GPS signal searching
GPS location finished
GPS sleep/power off
www.uniguardgps.com
UniGuard Technology Limited
Advertisement
