Table of Contents
Advertisement
9
[MIC 1]–[MIC 4] faders
Adjusts the input level of the MIC 1–4 jacks.
10
[PHONES] knob
Adjusts the volume of the headphones.
11
[FOLLOW] button
Turns the "Video Follows Audio" function or the "Audio Follows Video"
function on/off.
Turns the Video Follows Audio function on.
Lit blue
The scene automatically switches in tandem with
the audio input.
Turns the Audio Follows Video function on.
Lit orange
The audio output automatically switches in
tandem with the scenes.
Unlit
Off
12
MAIN level meter
Indicates the audio output level of the MAIN jacks.
Indicator color
Status
Red
Excessive (0 dB or higher)
Yellow
Suitable (-18 – -1 dB)
Green
Insufficient (-42 – -19 dB)
13
INPUT indicators (INPUT 5, 6)
Indicator
Explanation
MIC 5
MIC 6
Shows the audio source that's controlled by the
LINE 1
LINE 2
[5] and [6] knobs.
HDMI
USB
SIG/PEAK indicators (INPUT 5, 6)
Indicates the input levels for the audio source that's currently selected
(p. 6).
INPUT [5] [6] knobs
Adjusts the input level for the audio source that's currently selected.
14
SIG/PEAK indicator (USB)
Indicates the audio output level of the 4K STREAMING port (p. 6).
[USB] knob
Adjusts the audio output level of the 4K STREAMING port.
15
SIG/PEAK indicator (AUX)
Indicates the audio output level of the AUX jacks (p. 6).
[AUX] knob
Adjusts the audio output level of the AUX jacks.
16
[MAIN] fader
Adjusts the audio output level of the MAIN jacks.
17
SCENE/BANK [1]–[8] buttons
[BANK] button SCENE/BANK button function
These buttons select the scene to be output next
(the preset video).
The color of the button indicates the output
destination video bus.
Off (unlit)
Red:
PGM bus
Green: PST bus
* This is how the unit works when the system
mode is set to "PGM/PST" (the factory setting).
Switches the scene bank. The selected button is lit
On (lit)
blue.
18
TRANSITION
[MIX] [WIPE] button
Select the video transition effects (MIX or WIPE). The selected button
is lit.
[TIME] knob
Specifies the video transition time.
19
[BANK] button
When this is ON (lit), the SCENE/BANK [1]–[8] buttons function as bank
select buttons for the scene.
20
[AUTO TRANSITION] button
Turns the auto transition function on/off.
When this is turned ON (lit), the operation for the [AUTO] button is
automatically executed when you select the next scene to output
(preset video).
* This function is only enabled when the system mode is set to
"PGM/PST".
21
[LOGO] button
Turns the LOGO layer composite on/off for the scene (video) that's
output from the 4K STREAMING port (USB).
* Only still images saved in this unit can be used as sources for the
LOGO layer.
* The LOGO layer is composited regardless of the video bus you select
for the USB output.
22
[OUTPUT FADE] button
Fades the audio and PGM bus video in/out.
The [OUTPUT FADE] button indicates the fade status.
Fade-out completed
Lit
Blinking Now fading-in/out
Normal output
Unlit
* The fade time is specified by the [TIME] knob setting.
23
[DSK] button
Turns DSK composition on/off for the PGM bus scene.
24
[CUT] [AUTO] buttons
Use these buttons to automatically output the PST bus scene to the
PGM bus.
[CUT]
The scene switches instantly.
[AUTO]
The scene switches with a transition effect applied.
* This is how the unit works when the system mode is set to "PGM/PST"
(the factory setting).
Panel Descriptions
7
Advertisement
Table of Contents
