Roland VR-400UHD Startup Manual page 10

Switching Between Scenes
This explains how to switch between scenes in PGM/PST mode (p. 5), which is the factory setting.
1.
Press the [HOME] button.
The audio mixer screen is shown on the left
monitor, and the multi-view screen is shown
on the right monitor.
2.
Press the [MIX] or [WIPE] button to select the transition
effect.
Mix
The two videos are mixed as the transition
occurs.
Wipe
The next video moves across to replace the
original video.
3.
Use the [TIME] knob to set the video transition time
(0.0–2.0 sec).
4.
Press the [AUTO TRANSITION] button to turn the auto-
transition function on (the button lights up).
Auto-transition is a function that automatically switches between
scenes when you select the scene (preset video) to be output next.
5.
Touch the preset area in the multi-view screen.
Green border
A green border appears around the preset area.
While the green border is shown, you can select the next scene
(preset video) from scenes 1–8 to output.
10
6.
Touch the scene to output on the multi-view screen.
The program output scene changes.
* You can also press the SCENE/BANK [1]–[8] buttons to switch
between scenes.
MEMO
¹ When you touch the transition effect area on the multi-view
screen, the Transition Setup window appears, where you can
edit the transition pattern for the wipe effect and so on.
¹ You can also use the [CUT] and [AUTO] buttons to manually
switch between scenes without using the auto-transition
function.
Switching the Scene Bank
Each group of eight scenes is managed as a "bank". The VR-400UHD
features eight banks.
This explains how to switch between banks on the multi-view screen.
1.
Touch <BANK> on the multi-view screen.
The Bank Select window appears.
2.
Touch the bank you want to use.
This switches to the new bank.
3.
Touch < > to close the Bank Select window.