1. Manuals
  2. Brands
  3. netvox Manuals
  4. Accessories
  5. R311D
  6. User manual

netvox R313D User Manual

Wireless asset sensor
Hide thumbs

Advertisement

Table of Contents

R311D
Model：
Wireless Asset Sensor
Wireless Asset Sensor
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R313D and is the answer not in the manual?

Questions and answers

Related Manuals for netvox R313D

Summary of Contents for netvox R313D

  • Page 1 R311D Model： Wireless Asset Sensor Wireless Asset Sensor User Manual...

  • Page 2: Table Of Contents

    Table of Content 1. Introduction....................................................2 2. Appearance....................................................3 3. Main Features...................................................3 4.Set up Instruction..................................................4 5. Data Report....................................................5 6. Installation....................................................7 7. Important Maintenance Instruction............................................7...

  • Page 3: Introduction

    1. Introduction R311D is a long-distance Wireless Asset Sensor based on the LoRaWAN open protocol (Class A). LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance. Widely used in long-distance, low-data wireless communications.

  • Page 4: Appearance

    Low power consumption and long battery life  Note*: Battery life is determined by the sensor reporting frequency and other variables, please refer to http://www.netvox.com.tw/electric/electric_calc.html On this website, users can find battery life time for varied models at different configurations.

  • Page 5: Set Up Instruction

    4.Set up Instruction On/Off Insert batteries. Power on (users may need a flat blade screwdriver to open); insert two sections of 3V CR2450 button batteries and close the battery cover.) Turn on Press any function key till the green and red indicator flash once. Turn off Press and hold the function key for 5 seconds till the green indicator flashes for 20 times.

  • Page 6: Data Report

    Battery ---- 0x01 (0.1V) Note: The real data sending cycle is subject to the programming configuration before shipment. The reported data is decoded by the Netvox LoRaWAN Application Command document and http://www.netvox.com.cn:8888/page/index Data report configuration and sending period are as following:...
  • Page 7 Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V. MaxTime Users push the button, Wakes up and collects data REPORTS 2.7V. Wakes up and collects data 2.7V |2.7-2.8|=0.1 Recalculate MaxTime. 2.7V Does not report REPORTS 2.7V sleeping sleeping...

  • Page 8: Installation

    6. Installation This product does not have a waterproof function. After the screening is completed, please place it indoors. Installation and Precautions Note: To install the battery, use a screwdriver or similar tool to assist in opening the battery cover. 7.

This manual is also suitable for:

R311d

Table of Contents