Preparing The Aircraft - dji MATRICE 30 T Dock Version User Manual

Introduction
TM TM
DJI MATRICE 30T Dock Version aircraft can be linked to DJI Dock. With DJI FlightHub 2, it
can be used to perform automated operations remotely.
In the Box
Aircraft* ×1
* The aircraft comes with a microSD Card inserted.

Preparing the Aircraft

• Make sure the propellers are securely mounted and not damaged or deformed and
that there are no foreign objects in or on the motors or propellers.
• Make sure the lenses of the vision systems, gimbal cameras, FPV camera, glass of
infrared sensors, and auxiliary lights are clean and not blocked in any way, and that
the protective stickers are removed.
• Make sure the waterproof rubber port covers are correctly in place and securely sealed.
1. Unfold the frame arms on both sides in the same way. Make sure the frame arm folding
buttons pop out to ensure that the frame arms are locked firmly.
2. Make sure the gimbal camera is facing forward.
3. Insert two TB30 batteries (not included). Make sure the battery release toggles are in the
same position as shown in the diagram.
4. Press and then press and hold the power button to power on/off the aircraft. The power
indicator glows solid green after the aircraft is powered on.
Screws and Tools ×1 1671 Propeller ×2
CW
High
Low
1671 Propeller ×2
CCW
1