Table of Contents
Advertisement
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
WARNING: To avoid injury to hands
and feet, always disengage
clutches, shut off engine, and wait
for all movement to stop before
unclogging or working on snow
brush.
Keep hands and feet away from
brush.
STANDARD CONTROLS
See Figure 4 for all Controls and Features
locations.
Traction Drive Clutch - Left Hand
Lever
2
1
OL2701
NOTE: When traveling to or from the area to
be cleared, press down on the handlebars
enough to raise the front of the unit slightly off
the surface. Engage the traction drive clutch
without engaging the attachment drive clutch.
NOTE: Traction drive clutch should be
engaged before the attachment clutch when
brushing.
Attachment Drive Clutch - Right Hand
Lever
2
1
OL2691
IMPORTANT: If the belt squeals when the
attachment clutch lever is engaged, the
attachment drive may be frozen. Immediately
release the attachment clutch lever and move
the unit into a heated area to thaw.
OPERATION
Squeeze the Traction
Drive Clutch Lever
against the Handlebar
(1) to engage wheel
drive for propelling unit.
Release lever (2) to stop
movement.
Squeeze Attachment
Clutch Lever against
Handlebar (1) to
engage brush. Release
clutch lever (2) to
disengage power and
apply brake to brush.
Dual Handle Interlock
When Attachment Clutch and then Traction
Drive Clutch are engaged, the Attachment
Clutch will remain engaged (lever down) if
released. To stop brush, release Traction
Drive Clutch and both clutches will disengage.
Choke Control
1
to open choke for normal operation (1).
IMPORTANT: Gradually open choke after
engine starts.
Engine Shut Off Switch
ON
I
OFF
O
OM1001
Throttle
1
2
3
OL2073
GB - 11
Move choke control
right to close choke (2).
A closed choke
2
reduces air to engine
for easier start. Move
OS2020
choke control to the left
Press the switch to "O" (off) to
stop the engine. The switch
must be pressed to "I" (on) to
start the engine.
1. On
2. Off
The Throttle controls the
engine speed. To increase or
decrease the engine speed,
adjust to:
1. Fast (normal or warm starts)
2. Part-Throttle
3. Slow (cold weather starts)
Advertisement
Table of Contents
