Agitation; Technical Specifications; Hisorb Agitator; Power Supply - Markes International HiSorb Agitator Instructions For Use Manual

Table of Contents

Advertisement

QUI-1124
CAUTION
Always allow the vial block to return to room temperature before removing it from the heat
plate.
CAUTION
Always ensure that the heating function is off when no vial block is present.

3.8. Agitation

WARNING
The vial block will agitate during use, and care should always be taken to avoid injury. In
particular, the cover may represent a pinch hazard.

4. Technical Specifications

4.1. HiSorb Agitator

The HiSorb Agitator does not require any additional space around its exterior. All movements are
contained within the profile of the instrument, and there are no vents. However, the external power
supply requires space (see below).
Height:
14 cm (to top of agitator)
18 cm (to top of agitator fitted with a heated block for 16 × 20 mL vials; other sizes may
vary)
Width:
35 cm
Depth:
19 cm
Weight:
5 kg

4.2. Power supply

Manufacturer:
Model:
Mains voltage:
Mains current:
Voltage output:
Power:
Output current:
Inrush current:
Frequency:
Symbols:
Standards:
UL file number:
Height:
Width:
Depth:
Mains lead length:
Low-voltage lead length:
Page 6
Meanwell
GS220A24-R7B
100–240 V
ac
4.0 A (max.)
24 V
221 W (max.)
9.2 A (max.)
<120 A (cold start)
50–60 Hz
ANSI/UL 60950-1 CAN/CSA-C22.2 No. 60950-1 2007 EN 60950-1:2006
E183223
5 cm
9 cm
21 cm
100 cm
100 cm
www.markes.com

Advertisement

Table of Contents
loading

Table of Contents