Table of Contents
Advertisement
Please follow the installation steps below to ensure your appliance operates correctly.
Power
The appliance must be installed so the plug is accessible.
●
To ensure that the appliance is not accidentally switched off, connect your Wine Cabinet
●
to its own power point. Do not plug in any other appliance at this power point.
For power requirements, please refer to the serial plate located on the rear of the
●
cabinet.
It is essential that the appliance is properly grounded (earthed).
●
Connect the appliance to the electrical supply (220 V – 240 V 50Hz) with the fitted
●
plug and lead.
Connections to the mains supply should be in accordance with local regulations.
●
Location
Your Wine Cabinet should not be located in direct sunlight or next to any heat
●
generating appliance such as a cooktop, oven or dishwasher.
The appliance should not be located in garages or on carpeted floors.
●
This refrigerating appliance is intended to be used at ambient temperatures ranging
●
from 16 °C to 38 °C.
For optimum performance, it is recommended to control the ambient temperature
●
betwen 16°C and 25°C.
Ventilation and installation
To ensure adequate ventilation for your Wine Cabinet, see 'Product and cabinetry
dimensions'.
10
INSTALLATION INSTRUCTIONS
Advertisement
Table of Contents
