Toyota HILUX Owner's Manual Supplement page 30

28
2-1. Maintenance and care
z If you notice slow, heavy or noisy operation of the cover firstly clean
the externals of the roller cover (slats, side rails, seals, etc.) and the
internals of the canister as described on page 27. Allow the product
to dry thoroughly.
With the service covers open and the slats in the fully closed position
apply a coat of plastic compatible 100% liquid silicon spray to the spiral
shaped internals of the canister end plates ONLY.
Open and close the cover several times to ensure lubricant is dispersed
over all moving parts. Refit the service covers and recalibrate the roller
cover if required, refer to page 20. DO NOT use any other lubricants
or oils.
Cleaning the tub tray and textile liner
z Remove dirt and dust using a vacuum cleaner.
- Dirty surfaces can be washed with a cloth dampened with warm
water. A small amount of household detergent can be added to the
water if necessary.
z After cleaning thoroughly wipe off remaining traces of detergent and
water.