Step 5: Opening The Dead Front - enphase IQ System Controller 3 INT Quick Install Manual

Section A - Mounting an IQ System Controller 3 INT
Step 5:
Opening the dead front
Before removing the dead front, ensure the IQ System Controller 3
INT is completely de-energized.
Risk of equipment damage. Do not wire the IQ System
Controller 3 INT when it is energized.
NOTE: Step 1 shown above may not be required during initial
installation as Cellular modem may not be connected.
IQ System Controller 3 INT Quick Install Guide
IQ System Controller 3 INT orientation
Philips screw #2
Torque: 1.4 N m
9