enphase IQ System Controller 3 INT Quick Install Manual page 38

Safety Warnings
WARNING: This cellular device may cause interference with other electronic
equipment if the equipment is inadequately protected.
WARNING: Follow restrictions imposed for any environment in which the
device may operate, such as fuel depots, chemical plants, or where blasting
operations are in process.
Potential interference with pacemakers and other medical
devices
Radio frequency energy (RF) from cellular devices can interact with some electronic
devices, causing electromagnetic interference (EMI). The FDA helped develop a
detailed test method to measure EMI of implanted cardiac pacemakers and defibrillators
from cellular devices. This test method is part of the Association for the Advancement
of Medical Instrumentation (AAMI) standard. This standard allows manufacturers to
ensure that cardiac pacemakers and defibrillators are safe from cellular device EMI. The
FDA continues to monitor cellular devices for interactions with other medical devices.
If harmful interference occurs, the FDA will assess the interference and work to resolve
the problem.
Precautions for pacemaker wearers
EMI can affect a pacemaker in one of three ways:
• Stop the pacemaker from delivering the stimulating pulses that regulate the
heart's rhythm.
• Cause the pacemaker to deliver the pulses irregularly.
• Cause the pacemaker to ignore the heart's own rhythm and deliver pulses at a
fixed rate.
Based on current research, cellular devices do not pose a significant health
problem for most pacemaker wearers. However, people with pacemakers
may want to take simple precautions to avoid EMI from cellular devices:
• Keep the device on the opposite side of the body from the pacemaker to add
extra distance between the pacemaker and the device.
• Avoid placing a turned-on device next to the pacemaker (for example, don't carry
the device in a shirt or jacket pocket directly over the pacemaker).
Cellular modem Terms and conditions
These following Cellular modem Terms and Conditions ("Terms and Conditions")
will apply to anyone who purchases and/or uses ("you", "your") the Cellular modem
to enable internet connectivity for an IQ Gateway device ("Cellular modem Terms").
These Cellular modem Terms are incorporated into and made an integral part of the
Agreement.
1. Cellular modem description, use, unauthorized use limitation on use. The
Cellular modem must be used only in conjunction with Enphase's IQ Gateway/
IQ Combiner products. The Cellular modem shall not be used for any unlawful
purpose(s).
2. Limited Warranty. The Cellular modem comes with and is covered by a 5-year
Limited Warranty which is included in the standard Enphase Limited Warranty
which can be found at www.enphase.com/warranty
Except as expressly provided in this Section, to the maximum extent permitted
by applicable law, the Cellular modem is provided on an "AS IS" basis without
warranty whatsoever, and Enphase expressly disclaims all warranties, express,
implied, and statutory including the implied warranties of merchantability,
satisfactory quality, fitness for a particular purpose, title, and non-infringement.
Any use of the Cellular modem other than as expressly stated in these Terms and
Conditions shall constitute a breach of the limited warranty and render it null and
void. The Cellular modem will contain a SIM card provided by a network provider.
The SIM card (a) must not be removed from the Cellular modem, nor (b) used with
any other device. Any such removal or use shall constitute a breach of the Limited
Warranty and render the Limited Warranty null and void.
IQ System Controller 3 INT Quick Install Guide
("Limited Warranty").
3. Territory. The Cellular modem shall only be used in the countries listed on
this quick installation guide (QIG). Enphase in its sole discretion reserves
the right to amend the QIG to add or delete counties wherein the Cellular
modem may be used.
4. Network Coverage. Network Coverage is dependent upon network
availability which is the responsibility of the network service provider.
Enphase shall have no responsibility, nor any liability to any end user for
network service provider's non-coverage, lack of coverage, defective
coverage, or termination of the coverage.
5. Connectivity. Cellular modem connectivity is subject to the
telecommunication regulations and policies and terms of the network
service providers, and the applicable laws of the country in which the
Cellular modem is located and installed. Enphase makes no representation
or warranties as to such connectivity and Enphase shall have no
responsibility, nor any liability to you for network service provider's failure
to provide connectivity nor any responsibility or liability due to network
service provider's termination of connectivity.
6. Acceptable Use Policy. You must conform to the applicable acceptable use
policy ("AUP") posted on the applicable network providers website, and you
alone will be responsible for ensuring compliance with its terms. You will
indemnify, defend and hold Enphase harmless against any claims or losses
suffered by Enphase because of your breach of the AUP.
For Cellular modems with:
AT&T connectivity – The terms available at
html shall apply.
Manufacturer:
Enphase Energy Inc.,
47281 Bayside Pkwy.,
Fremont, CA, 94538,
The United States of America
PH: +1 (707) 763-4784
Assembled in China
Environmental Protection
ELECTRONIC DEVICE: DO NOT THROW AWAY. Waste electrical products should
not be disposed of with household waste. Refer to your local codes for disposal
requirements.
https:/ /www.att.com/legal/terms.aup.
Importer:
Enphase Energy Aust. Pty/Ltd.,
88 Market St.,
South Melbourne VIC 3205.
PH: +61 3 86691679
38