Installing The Side Cover; Air Shroud; Removing The Air Shroud; Installing The Air Shroud Fan Assembly - Dell Precision 7920 Owner's Manual

Installing the side cover

1 First hold and align the bottom of the side cover to the chassis.
2 Ensure that the hook on the bottom of the side cover snaps into the notch on the system.
3 Press the system cover until it clicks into place.
CAUTION: The system will not power on without the side cover. Also, the system will shut down if the side cover is removed
while the system is on.
4 Follow the procedure in

Air shroud

Removing the air shroud

1 Follow the procedure in
2 Remove the side cover.
3 To remove the air shroud Fan assembly:
a Disconnect the fan connector cable from the system board [1].
b Lift the shroud away from the system [2].

Installing the air shroud fan assembly

1 Place the shroud into its position and ensure that the tab fits into the system.
2 Press down the shroud until it locks with a click.
3 Reconnect the fan connector cable to the system board.
After working inside your computer
Before working inside your
.
computer.
Removing and installing components 13