Human Machine Interface, functions
2.1 System Status
2.2 Perform Diag-
nostics
66
The system status displays the status of the system after a diagnos is made.
The window displays the following:
•
System OK
•
Diagnostics performed
•
Time and Date
In addition to the systems automatic diagnostic, it is the possible to do a
manual one. To perform a manual diagnostic do the following steps:
1 From Start window, press Menu
2 Select 2. Diagnostics and press OK
3 In the 2. Diagnostics menu, select 2.2 Perform Diagnostics
4 Press OK for diagnostic test now
5 The window displays Performing diagnostics tests...
2.1 System status
System OK
Diagnostics performed
15:09 28-Feb-2009
2.2 Perform Diagnostic
Press OK for
diagnostic test now.
Back
OK
OK