Table of Contents
Advertisement
Head push
rod motor
The machine charges its batteries
Note: In order to extend battery life and ensure optimum performance of the machine,
it must be exceeded at least within the machine life
Charge the battery for more than 30 minutes.Do not leave the battery uncharged for a
long time.The following charge says
It is applicable to the charger attached to the machine.Be sure to use the following
chargers to avoid battery damage.
Typeof charger:charger forlead-acidbattery
Output voltage: 24V
Output current: 15A
◆ Automatic power off circuit
◆ Suitable for deep circulating battery charging
The charging items
1. Digital electric meter display number & LT;21. Please charge it immediately
2. Whencharging,please plugthe chargerinto thecharging dockingport ofthe
machine and connect the 220V power supply.
3. When charging, please move the machine to a well-ventilated place for charging, and
open the sewage tank side for ventilation.
4. When the digital electricity meter shows the number reaches 26, it means the
charging is completed
Brush
plate push
Drive walking motor
rod motor
Sling for Head sling
brush
plate
6
Advertisement
Table of Contents
