Table of Contents
Advertisement
Instruction Manual
Machine installation and commissioning
The machine is packaged in five parts: fuselage (water tank, rack, brush plate fixed
assembly), water absorption rack assembly, brush plate, charger.
1. Installation of water-absorbing pickles:
◆ Remove the package and take out the water-absorbing gripper assembly, as
shown in the figure below
Fix the suction head on the pendulum tail and tighten the cross handle
◆ Water absorption adjustment
2. If the suction scraper is pressed too low, the resistance is great
◆ Unscrew the setting screw of the small wheel with open head
◆ Reduce the roller, visually check the water absorption strip to the ideal position, and
tighten the screw;
◆ Repeat the above steps to the other pickpocket wheel and adjust the height to
the appropriate position;
3. Too high water absorption of the small wheel support rod is not effective
◆ Unscrew the support rod screw of the small wheel;
Head ferry
Sewage pipe
Cross handle
Head ferry
Water inlet
10
YZ-X5
Water level pipe
Advertisement
Table of Contents
