Introduction; Documentation And Support Of Product; Operating Temperature - HWM LoLog 450 Installation And Setup

1 I
NTRODUCTION
Thank you for choosing a HWM device. We trust it will provide you with many years of
service.
The "LoLog" family consists of LoLog 450, LoLog 500 and LoLog Vista devices. Each
logger can be built and configured to suit specific applications; several models of each
type are available. Please contact your sales representative for help with selection of an
appropriate model for your application.
1.1 D
OCUMENTATION AND
This user-guide covers the following model families:
Model Number(s)
RDL451LF/??*, RDL452LF/??*
RDL511LF/??*, RDL512LF/??*
RDL511LF/??V*, RDL512LF/??V*
The user-guide should be read in conjunction with:
MAN-110-0002
MAN-2000-0001
This user-guide provides details of the available logger interfaces, its operation and how
to install the product. It includes some information about use of the IDT app, which is a
software tool (from HWM) that allows users to check or modify logger settings and to
test that the logger is working correctly. It is also used later to retrieve the data from the
logger.
To view your data a viewing tool is required; refer to any user-guide or training
materials relevant to the tool you will be using (see also section 6).
Note: Periodically new features and changes are released, thus you may observe slight
changes from the diagrams and features shown in this manual. The available
features can vary depending on which LoLog model is in use.
Refer to IDT app screens and setting options to determine which features are
available on your logger.
In the event of any issue, please refer to the Troubleshooting section of this document
(see section 7). HWM also provides support of the logger devices by means of our
customer support webpages:
Should you have any questions that are not covered by this manual or the online help,
please contact the HWM Technical Support team on +44 (0) 1633 489479,
or email: cservice@hwm-water.com
1.2 O T
PERATING
Refer to the logger Datasheet or your sales representative for guidance on the storage
and operating temperature range of the device. Ensure the unit is within the operating
temperature range prior to installation.
S
UPPORT OF
Safety Warnings and Approvals Information.
User Guide - IDT (mobile) app.
https://www.hwmglobal.com/help-and-downloads/
EMPERATURE
P
RODUCT
Description
LoLog 450 models
LoLog 500 models
LoLog Vista models
4